Parts & Accessories
Jean Girard
Wed Apr 10 2013 18:45:59 GMT+0000 (Coordinated Universal Time)
Introducing the
SUPER 402 cu. in. FLATHEAD!
Built with modern technology and all new parts to be POWERFUL - RELIABLE - and ORIGINAL LOOKING!
NOSTALGIC APPEARING, Original size and shape, makes this engine a practical, contemporary version of the Popular FORD FLATHEAD. The Super 402 has been improved over the original by using modern parts and materials to make it an excellent performing, reliable power plant for your machine!
The Super 402 Flathead
BLOCK: The Super 404 uses a five main bearing Windsor block with a standard 4” bore and a 4” stroker crank to give 402 c.i. displacement.
DECK PLATE adapter makes the conversion to a Flathead. The 1 ½” plate is cast and CNC machined, attached to the block and has integral ports, valve seats, and guides. The valves run directly on the lifters, just like the original flathead. The over-bored and sleeved block makes a joint-less standard size cylinder. Studs from the deck plate hold the heads down.
CAM SHAFT by Crane, is a custom billet grind to fit the Windsor block, the standard Flathead layout and accommodates the roller lifters.
LIFTERS are OEM Hydraulic roller type to make valve operation quiet and efficient. No adjustment is necessary. Slight modification allows them to contact directly on the large valves.
VALVES and PORTS are much larger than original to supply adequate airflow to the 50 cube cylinders. Intake valves are 2” and exhausts
are 1 5/8”.
HEADS are designed with several objectives. Good water-flow from the Windsor block and a raised combustion chamber to accept pop-up pistons for high compression. The combustion chamber is iron to assure heat is transformed to crankshaft energy. The finned aluminum covers also direct the water to keep the spark plugs cool.
RODS are custom made steel billet to position the high compression pistons correctly in the raised deck cylinders. Cranking compression can be as high as 180 lbs.
INDUCTION timing is computer controlled with a knock sensor to retard spark in the event of detonation. This allows the engine to have a high compression for power and mileage. Distributor is mounted on the front of the engine.
COMPUTER controls fuel injection, ignition, and air fuel ratio. An OEM OBD 1 #7730 computer is reprogrammed to match the needs of the 402 FLATHEAD.
WATER PUMPS sit in shrouded housings, to increase the water flow beyond original when they ran in an open chamber. The water pumps are original truck style with modern seals to allow high pressures and RPM without leaking.
FRONT COVER serves as a timing chain cover, distributor mount and water pump mounts. It directs the water from the pumps to the original Windsor block water inlets.
EXHAUST from the center ports is routed through the valve lifter valley to join the end ports to exit on the sides of the block.
AUTOMATIC OR STANDARD Ford transmissions are easily bolted right up to the 351 Windsor Block to complete the power train assembly.
O.E.M. PARTS are used wherever possible: Block, bearings, pistons and rings, oil pump, crankshaft, timing gears and chain, vibration dampener, flywheel, oil pan and gaskets etc.
FINALLY an original looking, original size and shape engine makes the Super 402 a practical contemporary version of the popular Ford Flathead. It has been improved by using modern parts and materials to make it an excellent performing, reliable power plant for your Hot Rod or Machine.
PRICE is $30,000 for a Dyno-proven 402 Flathead with computer, wiring, pumps and accessories. Just install and go! Add $1,000 for 16 main bolt NASCAR block.
A $12,000.do-it-yourself kit is available that supplies everything that is custom made.
Call for Details: DICK BEITH, RODMOTION, (209) 329-2251
RODMOTION LLC, PO Box 837, Victor, CA 95253
(209) 329-2251 Email:rodmo@clearwire.net
Jean Girard
Sat Mar 02 2013 20:00:24 GMT+0000 (Coordinated Universal Time)
Bridgestone Potenza S-03 Pole Position Tires
Just bought a set of these for my SE-R a few weeks ago. Very grippy and responsive for their price!
$217.19 each / http://simpletire.com
Jean Girard
Sat Mar 02 2013 20:14:58 GMT+0000 (Coordinated Universal Time)
AIrbags are over rated...
Nardi Basic Kallista 350mm Steering Wheel - Black Leather w/ Polished Spokes - $259
- See more at: http://www.jhpusa.com/store/pc/viewPrd.asp?idproduct=2309&idcategory=258#sthash.yfofyWa0.dpuf
Jean Girard
Sat Mar 02 2013 19:43:05 GMT+0000 (Coordinated Universal Time)
The K&N 57 Series Gen II Air Intake Kits (FIPK's)
are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow chain robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
Horsepowerfreaks.com